Lifting towers developed for holding heavy weights at a great height. Its user friendly, compact design and great strength, make the ULK Lift an ideal complement for any kind of event.
Technical spec data
ULK 600 Lifts are fitted with detachable steel forks (650 x 60 x 60 mm / 2′ 1.59″ x 2.36″ x 2.36″) and have a loading height of 28 cm (11.02″) from the floor which makes its loading effortless.
The forks have been manufactured with a special reversible design to be able to set them at two different heights, gaining more height when fully extended. The forks also have 2 width positions to adjust to all truss types.
The Lifting Tower consists of extruded aluminium mast sections (Alloy: EN-AW 6082 T6 in accordance with standards UN-EN573-3/UNE-EN755-2:2009). These sturdy sections are extended by means of pulleys with ball bearing and a non-rotating Ø6 mm (0.24″) galvanised steel wire rope with steel core (Construction: 19×7+0), specially manufactured for lifting heavy loads (DIN 3069).
The mast sections are secured to the base with an over-sized “U” shaped steel plate.
ULK Lifts are fitted with detachable steel forks (650 x 60 x 60 mm/2′ 1.59″x 2.36″x 2.36″) and magnetic locking pins as standard, for a quick set-up.
The forks have three fundamental features:
– Special reversible design; to be able to set them at two different heights, gaining more height when fully extended.
– Adjustable design; to accommodate different load sizes.
– The forks can be removed; for a more convenient transporting and storage of the tower.
Compact base (540 x 760 mm / 1′ 9.26″ x 2′ 5.92″) manufactured in sturdy steel (ST-37) DIN-1626 and finished in a textured, black, anti-scratch powder coating (Epoxy) special for outdoor use (preventing rusting problems).
Base is provided with:
– 1 spirit level for a proper vertical adjustment of the tower.
– 4 heavy-duty swivel castors (Ø100 mm / 3.93″), for easy handling. The sturdy base is specially designed so that these lifts can be used with forklift trucks.
– 2 wheels (Ø 200 mm) which are used to help to tilt the tower back into the horizontal position.
– 2 mast steel braces for greater lift stability and also to protect the aluminium mast sections when the lift is being moved horizontally.
Its four detachable stabiliser legs, manufactured with reinforced steel (S235 JRH, DIN-EN 10219-1:2006), come complete with trapezoidal thread screw jacks levellers with reinforced spin handles (ergonomic design) which facilitates the levelling task. Their non-slip foot plates ensure a perfect adjustment of the tower to the floor surface.
To ease its horizontal movement and its loading in vehicles, the ULK Towers have four heavy-duty wheels made of black rubber with polypropylene core (Ø 200 mm) core: two of them placed in the base and another two under the brake winch which also protect the winch against damage.
For a quick, safe and effortless lifting process our ULK Towers are equipped with a AL-KO CF901 hand winch with automatic braking system, which stops the load at the desired height when the handle is released. This winch is certified for a maximum load of 900 kg (1984.2 lb) (In compliance with standards: BGV C1 and 2006/42/CE).
CF901 brake winch, specially designed for lifting heavy loads, is provided with a detachable crank handle to prevent any manipulation during the event and to offer easy and convenient transport and storage.
ULK Lifts comply with current safety standards: BGV C1, 2006/42/CE, DIN 56921, DIN 4113-2 guaranteeing maximum safety and durability, complying with the lightweight, sturdiness and manoeuvrability requirements needed to lift audio equipment.
Thanks to its easy handling and its simple and quick set-up, the ULK Lift can be considered as one of the most convenient and functional lift on the market.
ULK 600 is equipped with three safety systems to guarantee maximum reliability and resistance:
1.- It is provided with a AL-KO CF901 hand winch with automatic braking system. Load remains in position whenever the handle is released.
2.- ASB System (Automatic Safety Blocking System): Consisting of safety knobs which permit the user to block and unblock each of the mast sections.
3.- IPB System (Internal Pendulum Brake): Consists of an internal pendulum system that is automatically activated on each mast section if they were to suddenly fall, which can be easily unblocked by a trigger on each profile.
IMPORTANT: THE LIFT IS NOT TO BE USED AS A HOIST FOR LIFTING, SUPPORTING OR TRANSPORTING PEOPLE.
CAUTION: For outdoor assemblies, the tower must be secured with slings, wires, ropes, etc. to prevent movement caused by windy conditions and guarantee maximum stability.
ULK Lifts comply with current safety standards: BGV C1, 2006/42/CE, DIN 56921, DIN 4113-2 guaranteeing maximum safety and durability, complying with the lightweight, sturdiness and manoeuvrability requirements needed to lift audio equipment. Thanks to its easy handling and its simple and quick set-up, the ULK Lift can be considered as one of the most convenient and functional lifts on the market.