서울 금천구 가산디지털2로 70  대륭테크노타운19 B123 (가산동 345-29) l 대표전화 +82 (0)2-3289-6875 l Fax +82-(0)2-6944-8118

대표 이지훈 사업자 등록번호 108-20-26296 개인정보 관리 책임자 지상욱 (jirayer@ji-rayer.co.kr)  by Ji-Rayer Inc.© All rights reserved. 2015-2020

Quality made netherlands, hi-end

PA Loundspeakers 

SOUND PROJECTS

SOUND PROJECTS R&D addresses the audible anomalies caused by acoustically overlapping drivers and hi-end speakers in multiple combinations, inextricably linked with the interference between amplifier, loudspeaker, cabinet and room, improvements in logistics, transport, cluster design and installation time.

The sound reinforcement system shall hold two 1.4” HF drivers, each on a horn with a horizontal dispersion of 90 degrees and a vertical dispThe sound reinforcement system shall hold two 1.4” HF drivers, each on a horn with a horizontal dispersion of 90 degrees and a vertical dispersion of 2.5 degrees, four low-weight neodymium 6.5” drivers and two low-weight neodymium 12-inch drivers. The maximum peak output of the total system shall be 144dB at 1m.The sound reinforcement system shall hold two 1.4” HF drivers, each on a horn with a horizontal dis√persion of 90 degrees and a vertical dispersion of 2.5 degrees, four low-weight neodymium 6.5” drivers and two low-weight neodymium 12-inch drivers. The maximum peak output of the total system shall be 144dB at 1m.ersion of 2.5 degrees, four low-weight neodymium 6.5” drivers and two low-weight neodymium 12-inch drivers. The maximum peak output of the total system shall be 144dB at 1m.

The sound reinforcement system shall hold twelve individual fullrange line-array modules, each module comprising one 1-inch HF driver on a horn with a dispersion of 90 horizontal and 2.5 degrees vertical, flanked by 2 (neodymium) 6-inch drivers. The total system shall be powered by four 600W amplifiers.

 

The maximum peak output of the total system shall be a calculated 138dB at 1m. The syste¬m shall a frequency range of 35Hz-20kHz. The systems coverage angle shall be 90 degrees horizontal and 40 degrees vertical with a curvilinear characteristic.

The sound reinforcement system shall hold twelve individual fullrange line-array modules, each module comprising one 1-inch HF driver on a horn with a dispersion of 90 horizontal and 2.5 degrees vertical, flanked by 2 (neodymium) 6-inch drivers. The total system shall be powered by four 600W amplifiers.

 

The maximum peak output of the total system shall be a calculated 138dB at 1m. The syste¬m shall a frequency range of 35Hz-20kHz. The systems coverage angle shall be 90 degrees horizontal and 40 degrees vertical with a curvilinear characteristic.

SPX-4

The sound reinforcement system shall hold twelve individual fullrange line-array modules, each module comprising one 1-inch HF driver on a horn with a dispersion of 90 horizontal and 2.5 degrees vertical, flanked by 2 (neodymium) 6-inch drivers. The total system shall be powered by four 600W amplifiers.

 

The maximum peak output of the total system shall be a calculated 138dB at 1m. The syste¬m shall a frequency range of 35Hz-20kHz. The systems coverage angle shall be 90 degrees horizontal and 40 degrees vertical with a curvilinear characteristic.

X-ACT

Due to its small size the X-act will never cease to surprise and almost always exceed customer's expectations

in any situation: front of house, floor monitor, fixed installation, anywhere.

 

The X-act can immediately be recognised by its perfect voice reproduction.

This is because the human ear is extremely sensitive to deviations in this vital part of the frequency spectrum.

 

Unlike conventional wooden cabinets the complex shape virtually eliminates loss of articulation and punch caused by internal cabinet resonance.

1 / 3

Please reload