The hi-end sound reinforcement system shall hold two 1.4” HF drivers, each on a horn with a horizontal dispersion of 90 degrees and a vertical dispersion of 2.5 degrees, four low-weight neodymium 6.5” drivers and two low-weight neodymium 12-inch drivers. The maximum peak output of the total system shall be 144dB at 1m.
The syste¬m shall have a 60Hz-20kHz frequency range. The system shall have a 90 degrees horizontal and 6 degrees vertical coverage angle.
The cabinet shall be constructed of carbon-fiber composite, covered by a protective polyurethane coating.
The total system weight shall be 40kg only.
The system shall be a 3-way / 4-channel driven module within an array of sound reinforcement systems.
The system shall have a software prediction tool to determine the angles between adjacent cabinets and the settings for the processing unit.
Technical spec data
LF1 Transducer (pin 1) 12"
LF2 Transducer (pin 2) 12"
MF Transducer (pin 3) 4 x 6,5"
HF Transducer (pin 4) 2 x 1.5" (3"diaphragm)
Freq. response 65Hz-18kHz
Max. peak SPL @1m 144dB c.f. 2 (6 dB)
Coverage angle 90H x 6V Degrees
LF1 Rec. AMP Power 1200W @ 8ohm
LF2 Rec. AMP Power 1200W @ 8ohm
MF Rec. AMP Power 600W @ 8ohm
HF Rec. AMP Power 600W @ 8ohm
Sensitivity (LF/MF/HF) 98/106/115dB
Additional descriptive data
Cabinet construction: carbon fiber
Finish PU coating
Weight 40 kg
Size WxHxD (mm) 600x345x560
Rigging points Fully Integrated Easy-rig Flying System.
IP rating IP 54
2 x Neutrik NL8 – daisy chained
pin 1 - LF1 @ 8ohm
pin 2 - LF2 @ 8ohm
pin 3 - MF @ 8ohm
pin 4 - HF @ 16ohm
Max. operating temp -10 to 40 C ambient
Technical specs for a 4 cabinet flat array
System 4 x Linex™
Frequency response 65Hz - 18kHz
Cont. SPL (AES standard) 145 dB @ 1m
Technical specs for a 4 cabinets curved array
System 4 x Linex™
Frequency response 65Hz - 18 kHz
Cont. SPL (AES standard) 142 dB @ 1m
Fig1. Typical frequency response of a curved Linex™ array
Specifications subject to change without notice