서울 금천구 가산디지털2로 70  대륭테크노타운19 B123 (가산동 345-29) l 대표전화 +82 (0)2-3289-6875 l Fax +82-(0)2-6944-8118

대표 이지훈 사업자 등록번호 108-20-26296 개인정보 관리 책임자 지상욱 (jirayer@ji-rayer.co.kr)  by Ji-Rayer Inc.© All rights reserved. 2015-2020

BASELINE

The hi-end sound reinforcement system shall hold twelve individual fullrange line-array modules, each module comprising one 1-inch HF driver on a horn with a dispersion of 90 horizontal and 2.5 degrees vertical, flanked by 2 (neodymium) 6-inch drivers. The total system shall be powered by four 600W amplifiers.

 

The maximum peak output of the total system shall be a calculated 138dB at 1m. The syste¬m shall a frequency range of 35Hz-20kHz. The systems coverage angle shall be 90 degrees horizontal and 40 degrees vertical with a curvilinear characteristic.

 

The cabinet shall be constructed of cross grain laminated multiplex, covered by a protective 2 component polyurethane coating. The total system weight including amplifiers and audio control shall be 122 kg only.

It shall have an IEC CLR-3 audio in and output connector and a powercon in and thru mains connector.

The system shall be a self-powered design holding its own protective audio logic control electronics and amplifiers within the cabinet.

Technical spec data

System

 

DL2214

 

Acoustical specifications:

 

- Drivers: 12 x 1”, 24 x 6.5”

- Freq. response: 40Hz-18kHz

- Max. peak SPL @1m: 132dB c.f.2 (6 dB)

- Coverage angle: 90H x 40V curvilinear

 

Electrical specifications:

 

- Amplifier(s): MA4 technology

- Output: 1800W sine (DALC limited)

- Filter subsonic: 40Hz, 2nd order

- Input impedance: 20 kOhms balanced, 10 kOhms unbalanced

- Output impedance: hard-wired to input

- Power consumption.

- Mains voltage: 230V (other on request)

- Mains frequency: 50/60 Hz

- Idle: < 50VA

- Full load: 1800VA. DALC limited Ref. to continuous pink noise signal

  (6 dB crest factor within the specified range)

- Protection

- Protection threshold: +4dBU

- D.A.L.C. (Dual AudioLogic Control)

- Transient (soft power-up)

- DC-voltage short-circuit

- LED indication: power-on/signal/protect

 

Additional descriptive data:

 

- Cabinet construction: cross grain laminated multiplex

- Finish: Nano-armor™ coating

- Weight: 125 kg

- Size WxHxD (mm): 415x2205x840

- Rigging points: integrated single liftpoint levelbar, angle adapter (optional)

- Audio connectors: IEC XLR-3 in/out

- Main connectors: powercon in, powercon out

- Max. operating temp.: -10 to 40 C ambient

System

 

DL2317

 

Acoustical specifications:

 

- Drivers: 12 x 1”, 24 x 6.5” ND

- Freq. response: 40Hz-18kHz

- Max. peak SPL @1m: 138dB c.f.2 (6 dB)

- Coverage angle: 90H x 40V curvilinear

 

Electrical specifications:

 

- Amplifier(s): MA4 technology

- Output: 1800W sine (DALC limited)

- Filter subsonic: 40Hz, 2nd order

- Input impedance: 20 kOhms balanced, 10 kOhms unbalanced

- Output impedance: hard-wired to input

- Power consumption.

- Mains voltage: 230V (other on request)

- Mains frequency: 50/60 Hz

- Idle: < 50VA

- Full load: 1800VA. DALC limited Ref. to continuous pink noise signal

  (6 dB crest factor within the specified range)

- Protection

- Protection threshold: +4dBU

- D.A.L.C. (Dual AudioLogic Control)

- Transient (soft power-up)

- DC-voltage short-circuit

- LED indication: power-on/signal/protect

 

Additional descriptive data:

 

- Cabinet construction: cross grain laminated multiplex

- Finish: Nano-armor™ coating

- Weight: 122 kg

- Size WxHxD (mm): 415x2205x840

- Rigging points: integrated single liftpoint levelbar, angle adapter (optional)

- Audio connectors: IEC XLR-3 in/out

- Main connectors: powercon in, powercon out

- Max. operating temp.: -10 to 40 C ambient

 

System

 

DL2317D

 

Acoustical specifications:

 

- Drivers: 12 x 1”, 24 x 6.5”ND

- Freq. response: 40Hz-18kHz

- Max. peak SPL @1m: 138dB c.f.2 (6 dB)

- Coverage angle: 90H x 40V curvilinear

 

Electrical specifications:

 

- Amplifier(s): CCD™ technology

- Output: 3000W sine (DALC limited)

- Filter subsonic: 40Hz, 2nd order

- Input impedance: 20 kOhms balanced, 10 kOhms unbalanced

- Output impedance: hard-wired to input

- Power consumption.

- Mains voltage: 230V (other on request)

- Mains frequency: 50/60 Hz

- Idle: < 50VA

- Full load: 3000VA. DALC limited Ref. to continuous pink noise signal

  (6 dB crest factor within the specified range)

- Protection

- Protection threshold: +4dBU

- D.A.L.C. (Dual AudioLogic Control)

- Transient (soft power-up)

- DC-voltage short-circuit

- LED indication: power-on/signal/protect

 

Additional descriptive data:

 

- Cabinet construction: cross grain laminated multiplex

- Finish: Nano-armor™ coating

- Weight: 120 kg

- Size WxHxD (mm): 415x2205x840

- Rigging points: integrated single liftpoint levelbar, angle adapter (optional)

- Audio connectors: IEC XLR-3 in/out

- Main connectors: powercon in, powercon out

- Max. operating temp.: -10 to 40 C ambient